China Standard Oil, Fuel, Air Conditioning Filter 4288899 Auto Parts with China Factory agricultural sprayer parts

Product Description



Air Filter 

OE Number 
Applicable vehicle type Fritz Kreisler
Outer Diameter : 222 mm Inner Diameter : 185 mm Height : 56 mm
Air Filter


Air filter element is a kind of filter, also called air filter cartridge, air filter, etc. It is mainly used for air filtration in engineering locomotives, automobiles, agricultural locomotives, laboratories, aseptic operation rooms and various precision operation rooms.

The engine in the working process to suck in a lot of air, if the air is not filtered clear, the suspended dust in the air is sucked into the cylinder, it will accelerate the piston group and cylinder wear. Larger particles entering between the piston and the cylinder will cause a serious "cylinder pulling" phenomenon, which is particularly serious in a dry and sandy working environment. The air filter is installed in the front of the carburetor or the intake pipe to filter the dust and sand in the air to ensure that sufficient and clean air is entered into the cylinder.


Installation and use

1. During installation, whether the air filter and the engine intake pipe are connected by flanges, rubber tubes or direct connections, they must be tight and reliable to prevent air leakage, and rubber gaskets must be installed on both ends of the filter element; The CZPT nut holding the air filter outer cover should not be screwed too tightly to avoid crushing the paper filter element.

2. In the maintenance, the paper filter must not be cleaned in the oil, otherwise the paper filter will fail, and it is easy to cause a car accident. Maintenance, only use the vibration method, soft brush removal (along with its crease brush) or compressed air blowback method to remove dust and dirt attached to the surface of the paper filter. For the coarse filter part, the dust in the dust collecting part, the blade and the cyclone tube should be removed in time. Even if each time can be carefully maintained, the paper filter can not fully restore the original performance, the air intake resistance will increase, therefore, generally when the paper filter needs to carry out the fourth maintenance, it should be replaced with a new filter. If the paper filter element is broken, perforated, or the filter paper and the end cap are degumming, it should be replaced immediately.


Oil, Fuel, Air Conditioning Filter 4288899 Auto Parts With China Factory
Oil, Fuel, Air Conditioning Filter 4288899 Auto Parts With China Factory
Oil, Fuel, Air Conditioning Filter 4288899 Auto Parts With China Factory
Oil, Fuel, Air Conditioning Filter 4288899 Auto Parts With China Factory
Oil, Fuel, Air Conditioning Filter 4288899 Auto Parts With China Factory
Oil, Fuel, Air Conditioning Filter 4288899 Auto Parts With China Factory

About us:

HangZhou Zhouhao Filters Co.,Ltd is a manufacturer specialized in vehicle filters.It's located in Xihu (West Lake) Dis. city, ZheJiang province.Our products contain air filter,oil filter,fuel filter and cabin filters etc.After 20 years of unremitting efforts,we have become a modern enterprise integrates production-processing-sales into one.Our products are distributed at home and abroad,and win good reputation from our customers.
Welcome all friends visit our factory!

Why choose us:

1. Excellent quality
2. Competitive price
3. Fast delivery time
4. Strong service team
5. More types choice
We believe business is not only business,but a longterm friendship!

After-sales Service: Yes
Warranty: Yes
Type: Air Filter
Material: Paper Core
Structure: Filter Element/Assy
Filtration Grade: Hepa Filter


Customized Request


Tips For Maintaining Your Tractor Parts

In this article, we'll cover some important tips for maintaining your tractor parts. Read on to learn about clutches and CZPT fittings. We'll also discuss what tractor parts need to be repaired and how to ensure your equipment stays up and running for years. Also, we'll discuss preventative maintenance and how to choose the right tractor parts company. This will ensure you'll never have to replace your parts if you experience a problem.

Maintenance of tractor parts

If you own a tractor, then you know how important it is to maintain it properly. You should service it at least once a year or whenever you notice that the tractor has issues. Typically, these issues will include a struggling engine or battery, reduced power, and oil leaks. During a service, you should make sure that all the fluids are at their proper levels and replace worn parts as needed. Ideally, you should have a maintenance checklist for tractor parts, so you can refer to it whenever you have a problem.

It is also important to grease exposed fittings on your tractor. You can purchase lithium-based grease from automotive parts stores, or you can get universal ones that come in aerosol cans. Always remember to properly torque nuts and bolts before putting them back on. If you fail to do this, the parts may become loose and start vibrating. Ensure that these components are greased properly so they don't become loose and cause problems later on.

If you are using a tractor outdoors, it is important to maintain the tractor's batteries. This will help protect it from rust and corrosion, both of which can shorten the life of your battery. You can also use a baking soda solution to clean the battery, as it is safe to use. The battery terminals should be clear of obstructions and be inspected frequently. You should also turn off the tractor's ignition before working on the battery or disconnected lead-acid batteries.

Regularly replace your tractor's 12 volt battery. A battery is essential for tractor operation, as without it, the starter/generator will not work. Also, make sure to purchase the correct one for your tractor model. You should also check the belts on your tractor. If there is any loose bolt or component, you should replace it. Also, make sure to remove any straps or chains that are holding the battery. After replacing the belts, store the tractor's battery in an area with good climate control. A battery maintainer can be purchased at any auto parts store.


Types of tractor clutches

Different types of tractor clutches perform different tasks. For example, single-plate clutches can disengage a tractor's PTO when the engine is off. On the other hand, sequential clutches can disengage both the wheel drive clutch and the PTO clutch. These types of tractor clutches are common in tractors that have between 15 and 100 horsepower. This article will discuss the differences between these clutches and their functions.

Single-plate clutches are the most common type of tractor clutch. They transfer torque by friction between a clutch plate and the engine's input shaft. A single-plate clutch has a single plate that is mounted on the clutch shaft. A single-plate clutch has a conical friction surface on each side. When the clutch pedal is pressed, the male cone slides into contact with the female cone. When the clutch pedal is released, the male cone slides away from the engine shaft.

Another type of tractor clutch is the diaphragm clutch. These use less rigid springs to transmit power to the tractor's wheels. Diaphragm clutches are the same as conventional clutches, except that the lever does not apply pressure to the pressure plate. Both clutches are important to tractor performance and safety. They help farmers make quick turns and help move tractors. Tractors' diaphragm clutches have inspired many video games.

Modern tractors offer many different types of drivetrains. Here, we compare the advantages of each type. The original drive system relied primarily on the clutch to shift gears and change range. Additionally, it relies on a clutch to engage/disengage the PTO drive. A partial depression stops all drives, while a full depression only stops the transmission. In contrast, modern tractors have independent PTO drives that are independent of the gearbox.

CZPT Accessories

CZPT accessories are available for many tractor parts. These are typically used where grease is required, such as ball joints and universal joints. They are also common on hard surfaces that slide on, such as on a wheelbarrow. You can find them in many places, including on old tractors. To properly lubricate these parts, you should use an electric or cordless grease gun. Both are more expensive than the $10 mini pistol grips, but they help reduce hand fatigue and make maintenance easier.

If you cannot find a CZPT fitting, try a grease fitting tool or fitting activator. These are used to loosen stuck bearings. The tool works by filling it with grease or diesel and hitting it with a hammer to release it. However, investing in a regenerator of the right quality - cheap will do little to help. You can also purchase replacement CZPT accessories in various sizes to replace damaged accessories.

If not cleaned properly, grease can damage moving parts. The rag will help you remove oil from your nipples. Excessive lubrication can cause rust. In addition to damaging moving parts, grease attracts dust, sand and grime. Therefore, it is important to keep CZPT fittings clean and free of grease. If you can't clean them properly, you can use a grease gun to apply it to the CZPT accessories.

A grease gun can also be a handy tool on your farm. When you need to lubricate tractor parts, grease accessories can help you do just that. If you don't have a grease gun, consider buying a CZPT with a grease gun. It can make your life easier and keep your parts running smoothly. You can also save a lot of time and money by lubricating parts.


Preventive Maintenance

Preventive maintenance of tractor components is critical to maintaining efficiency. Regular tractor maintenance reduces unplanned downtime, increases efficiency and minimizes repair costs. As a tractor owner, it is important to understand and follow the manufacturer's recommended maintenance procedures for various parts. Read the owner's manual for the most common problems that can affect your tractor. Preventive maintenance can prevent unexpected costs during the workday or in the field.

A preventative maintenance program should include operator training. Operators must know how to perform routine maintenance tasks and how to complete them properly without fail. Operator training can include a review of the operator's manual, demonstrations of system controls, and testing of equipment and parts. Operator training can also include creating checklists of minor maintenance tasks to help operators maintain machines properly. This can also reduce the need for emergency repairs or rushed parts shipments.

Proper lubrication and regular inspection of tractor parts are essential to keep your tractor in good condition. Lubrication will keep internal parts from rust and other debris from causing damage. Additionally, tractor owners should regularly change their oil and change oil filters. This will help protect your engine and reduce friction. You can also visit your local dealer for checkups. Finally, clean the air filters, as dust and other particles in the air can cause serious damage to your tractor.

If you live in a cold climate, preventative maintenance on tractor parts is vital to keeping your tractor in peak condition for the winter months. Winter-grade fuel and oil are essential for keeping your tractor running smoothly and efficiently during the cold season. Remember to follow your owner's manual when it comes to fuel, as fuel that is not appropriate for your climate can clog the filter and cause a breakdown. By following these guidelines, you can ensure that your tractor runs optimally all winter long.

China Standard Oil, Fuel, Air Conditioning Filter 4288899 Auto Parts with China Factory   agricultural sprayer partsChina Standard Oil, Fuel, Air Conditioning Filter 4288899 Auto Parts with China Factory   agricultural sprayer parts
editor by CX 2023-11-07