Product Description

front end hydraulic  cylinders for rear-end tippers and trailers

Basic parameters as below:
FC WT:

Cylinder Tube O.D.	203mm--274mm
Operating Pressure	16-20Mpa
Numbers of Stage	3,4, 5
Largest Moving Stage Diameter	110mm--254mm
Stroke	Standard 4280mm--6180mm or shorter, longer
Closed Length	Standard  1195mm--1945mm or shorter, longer
Extended Length	Standard 5475mm--8125mm, or shorter, longer
Oil Port	G1/1''SAE
Warranty Period	14 months after date of production
Upper Bracket Width	245-270mm
Lower Bracket Width	340-360mm
Axle Diameter	65mm or 60mm
Mount Distance From Upper Axle Center to Lower Axle Center	325-335mm

FC  WTHY:

Cylinder Tube O.D.	131mm-240mm
Operating Pressure	16-20Mpa
Numbers of Stage	3, 4, 5
Largest Moving Stage Diameter	110mm--214mm
Stroke	3205mm--9030mm
Closed Length	1339mm-2312mm
Extended Length	4544mm-11342mm
Upper Bracket Width	201mm-360mm
Lower Bracket Width	163mm-270mm
Axle diameter	60mm
Mount Distance From Upper Axle Center to Lower Axle Center	343mm
Warranty Period	14 months after date of production
Oil Port	G1/1''SAE

Technical specification Description:

Material	Carbon steel, Alloy steel, Stainless steel
Honed tube	50-280mm, Heat treatment, honing, rolling
Piston rod	50-240mm,tempering, plated nickel, Chrome or ceramic
Working Pressure	16-20Mpa
Seals	Parker, Merkel, Hallite
Technology	Bosch Rexroth, Parker, HYVA
Coating	Sandblasting, primer paint, middle paint, finish paint
Temperature range	-30°C to +100°C
Work medium	Hydraulic Oil
Piston speed	maximum 0.4m/s
Mounting style	Earrings, flange, foot mounting, screw thread.

No.1 manufacturer in China, specialized in design, R&D and manufacturing of hydraulic cylinder/ system with over 20years' experience, company cover an area of 180,000 square meter, there are 600 employees and 700 sets of equipment, annual output more than 200,000 sets. 
Advantage
1) Professional, skilled, reliable.
2) One-stop total solution
3) Ready stock goods with fast delivery
4) Customizable: Non-standard sizes are also available
5) Small quantity is acceptable
6) Refund or replacement for any product faulty

We firmly believe that quality products from the outstanding design and concept, there are 25 engineers with rich experience in our strong technical team and more than 9,000 types of design. Analyzes, calculations, strength check and motion simulation in variety of software to make our design more close to actual working conditions, We will consider various factors in the design stage to avoid each risk of project failure. Our design and products could perfectly match customers' varied needs. 

Complete production lines:

Strict Quality Control:

>All specification is designed by professional engineer.
>All material is high quality-Seal kits were purchased from USA, Japan, UK and Sweden.
>All material is processed by skilled workers and advanced CNC lathe
>All cylinders are 100% tested before package to ensure every cylinder is qualified for its purpose
>Package is air cushion film for each cylinder and steel case for all cylinders to ensure goods can arrive at customer safely
>14 months warranty and long time track service is offered to solve any problems you meet after sale.
 
 
Rich market experiences:

Guarantee and after sale service:
>7 x 24 hours technical support through email
>Goods will be delivered safely on time
>14 months guarantee after destination port arrival
>Life long time track service
 

FAQ:
Q1. What are the same aspects of your cylinder with Hyva cylinder?
A: Same inside structure.
Same outside dimension and same mounting sizes. It can be interchangeable with Hyva's
 
Q2. Compared with Hyva cylinder, what are your cylinder advantages?
A: 1. Rod are chrome plated.
2. Tubes are quenched and tempered.
3. Tube inner hole goes through deephole boring machine processing. Surface roughness is 0.4Ra 
and circular degree is 0.571.
4. Good quality yet lower price.
 
Q3: Are you a manufacture or a trade company?
A: Manufacture, we are the leader manufacturer of hydraulic industry in China with 20 years' experience and technology accumulation. With strong technical team we could solve any annoyance of you.
 
Q4: Do you have quality control system?
A: Yes, The quality management system introduced is: ISO/TS 16949:2009-certified by NQA and IATF cert.
 
Q5: How can i get a booklet and buy a cylinder from you?
A: Very easy! Just leave me a message or email or call me directly, let me know you are interesting in our products. I will talk with you for the details soon!
 
Q6: Can you tell me the price for the cylinder?
A: 1. Please advice the drawing with technical requirement.
2. Please advice the model No. after you check our booklet.
3. Please advice the tipping capacity, number of stages, closed length, mounting type and size.
4. Please also help advice the quantities, this is very important.
 
Q7: Do your products come with a warranty?
A: Yes, we have 1 year warranty. In this year, if the quality problem we will free repair for you.
 
Q8: Hydraulic cylinder internal leakage?
A: 3 main reasons causing internal leakage: Overload, polishing bad controlled, cheap seal kits. As is known to all, vehicles in China are often overloaded, our products all designed to bear the overload power. Advanced equipment could assure the polish processing. And we use the imported/TOP brand seals to meet customers' requirement.
 
Q9: What about the quality feedback of your products?
A: WE HAVE NEVER RECEIVED EVEN ONCE QUALITY COMPLAINT FOR MANY YEARS OF INTERNATIONAL BUSINESS.
 
Q10: Can you help me to install or recommend what kind of hydraulic cylinder or power pack should I use for specific machine?
A: Yes, we have 25 experienced engineers who are always ready to help you. If you do not know what kind of hydraulic cylinders should be used in your machine, please just contact us, our engineers will design the exact products match your need.
 
Q11: What is the delivery time?
A: Within 15 days for samples.
15-30 days for bulk production, which is depend on quality, production process and so on.
 
Q12: What is your main payment term?
A: T/T, L/C, D/A, D/P either is available

 

Preventative Maintenance on Tractor Parts

You should not take your tractor out of commission by replacing the parts that are not working properly. You should be proactive about maintaining your tractor parts to ensure that they work well and are of the highest quality. You should also check if the company is 10 years old or more, as this will ensure that they have enough experience to handle warranty issues and any other problems. Lastly, you should check if the tractor parts company has a good reputation. Having a long standing company that is available around the clock is a plus.

Preventative maintenance of tractor parts

Performing preventative maintenance on tractor parts will help you avoid unexpected breakdowns and enhance its efficiency. Whether you're the sole owner of a tractor or a part-owner, you should know which parts you need and where to find them. Having spares available is also important, as they can help you solve problems quickly. Listed below are some of the parts you need to know about. These components are essential for your tractor's engine.

To maintain your tractor's internal components, check for wear. Lubricate internal parts regularly to reduce friction. When possible, bring your tractor to a dealer for a thorough inspection. Additionally, remember to keep the tractor's air filter clean. Dust in the air strains the tractor's engine, and a dirty air filter can cause a lot of damage. By following the manufacturer's instructions for proper maintenance, you can avoid costly repairs down the road.

For oil changes, check the owner's manual for recommended oil change intervals. Make notes in the manual about the parts you'll need. You can also refer to the manufacturer's PM checklist. Depending on the type of tractor you own, you may need to change the oil once a year or more often. To keep your tractor running optimally, drain old oil after every use. The same goes for hydraulic fluid. Over time, it can become contaminated with particles and water. Therefore, it's best to change it every year.

Modern tractors use a cooling system with fans and radiators. This system operates in varying temperatures and if it breaks down, you risk damaging the engine's core parts. In addition, you should store your tractor's battery under climate control. A battery maintainer can be purchased at any auto parts store. It's a great idea to regularly inspect your tractor's engine for problems as early as possible.

Types of tractor clutches

In a modern tractor, there are many types of transmission systems, and this article compares the pros and cons of each type. The original drive system of tractors relied on a clutch to change gears and range and engage/disengage the PTO drive. The clutch was usually a two-stage design; a full depression disengaged all drive systems while a partial depression only disengaged the gearbox. Today, these systems are independent.

The friction plate is a steel plate with a splined central hub. It features annular friction facings and is held between the flywheel and pressure plate. It has splines that limit its axial travel along the gearbox's driving shaft and dampen torsional vibrations. Single-plate clutches are most commonly used in heavy agricultural equipment. While they were initially developed as a cost-effective alternative to drum brakes, they quickly gained popularity due to their low price and ease of use.

Another type of tractor clutch is the wrap-spring. These use a special cast-iron spring. This spring is able to transmit torque to the driven plate when the tractor is operating at normal engine speed, while the clutch springs help transmit torque to the driven plate when the engine is running at high engine speeds. The wrap-spring clutches must be lubricated with light oil and should be checked for deterioration after a few years.

The advantages and disadvantages of these types of clutches are explained briefly. They are generally made from high-quality materials and contain a high copper content. They have high-friction properties and can transfer heat effectively to the engine. The friction coefficient of these types of clutches ranges from 0.33 to 0.4. As a result, they are the best choice for intensive applications. In conclusion, there are many advantages and disadvantages of each type of tractor clutch.

Types of tractor transmission gears

There are several different types of tractor transmission gear. One of the most common is hydrostatic. A hydrostatic transmission works like a standard manual transmission, and operates with a pedal. To operate a hydrostatic transmission, you simply select the gear and engine speed you want, push the pedal, and the hydraulic oil turns the gears. Because this type of transmission is clutchless, it provides smooth forward/backward operation without the need for a manual shifter.

Tractor transmissions come in several types and have different features. Some of these systems are better for certain types of work than others, and you'll find different types depending on the size and type of your tractor. Many tractors have 2 types of transmissions: geared speed and power shift. Each type offers different benefits, and they vary in cost and ease of use. There's a geared speed transmission, a synchromesh transmission, and a power shift transmission.

A CVT (continuously variable transmission) is another popular option. Like hydro, CVTs use a belt to transfer power from the engine to the wheels. These tractors can shift gears with little effort. These tractors can reach up to 4 speeds without the need for a clutch. Powershift transmissions are simpler and more durable than CVTs. They're also easier to repair. But a CVT may be the better choice for your farm tractor.

Hydrostatic and power shuttle transmissions allow you to shift gears and direction without the use of a clutch. Hydrostatic transmissions are usually hydraulically actuated, which makes it easy to change gears without using the clutch. Similarly, power shuttle transmissions are great for heavy-duty forward-and-reverse shifting. In either case, the clutches are hydraulically actuated and bathed in oil.

Types of CZPT fittings

In a nutshell, there are 2 types of CZPT fittings: standard and grease-fill. Standard CZPTs have 3 to 4 pumps of grease per fitting. Grease-filled CZPTs tend to attract dirt, dust, and sand, which can damage moving parts. Keeping these parts clean is crucial to their long-term performance. Using a rag to wipe off excess grease is an excellent way to ensure that the seals remain as sealed as possible.

There are different types of grease-filling tools available. Some are specifically designed to clear blocked CZPTs. These tools are used to fill the CZPT fitting with grease or diesel fuel and hit the fitting with a hammer. Be sure to use high-quality fitting rejuvenators, as cheap ones are less effective. These are also harder to find than grease-filling tools. To avoid these issues, use the proper tools when servicing your tractor.

CZPT fittings are used for many different kinds of tractor parts. You may find them on lawn equipment, construction equipment, and farming equipment. If you are unsure of what type your equipment has, ask your local CZPT dealer or visit 1 of their 17,000 CZPT AutoCare locations. Don't forget to regularly grease these parts for the best performance. When you don't have time to do so, they can lead to costly repairs.

Standard CZPTs feature a dome-shaped nipple that makes it easy to spot. Flow-stop fittings feature a ball check valve that reduces backflow during lubrication. Drive-type CZPTs feature a special coupler with a cross-pin to provide a positive lock. This type of grease CZPT eliminates the need for tapping during servicing.

Preventative maintenance of tractor's CZPT fittings

Proper grease application and regular inspections are important parts of CZPT fittings. If a CZPT becomes stuck in an opening, the ball may not be able to come out. Lubrication around CZPTs is important as grease can damage the components and cause bigger problems. A tractor's CZPT fittings are part of the tractor's electrical system, so it is important to replace them when they become damaged.

Grease CZPTs allow the addition of grease at the manufacturer's specifications. These fittings consist of a spring and metal ball inside a nipple. The grease gun compresses the spring and releases the ball from the nipple opening. Grease CZPTs are essential parts of heavy equipment, as a failed grease CZPT may cause brake failures and other systems to fail. Failure to maintain these fittings can cause rollover accidents.

Greasing the CZPTs is a vital part of regular tractor maintenance. Greasing the CZPTs will prevent your tractor's bearings from sticking and make your work easier. Grease the CZPTs on pivot points and joints to keep them lubricated and running smoothly. For easy grease application, consider using a battery-powered grease gun. Once you have lubricated the CZPTs, you can move on to other parts of the tractor.

In addition to grease, you should check for leaks on your tractor's CZPTs regularly. If you notice dirt buildup, there might be a leak. You can also check for any worn hoses to avoid major problems. If there is a leak, tighten the fittings and replace worn ones as soon as possible to avoid further damage. By performing these tasks regularly, you can increase the efficiency of your tractor and avoid unexpected breakdowns.