Tag Archives: hydraulic pressure test

China high quality CZPT High Pressure Test Hose/Tube/Pipe/Valve/Sensor/Cylinder Hydraulic Pressure Test near me shop

Product Description

Hydraulic high pressure test machine -Pneumatic liquid bosoter pump control type with armored glass protection cabinet.

Applicable for :hose/tube/pipe/valve/sensor/cylinder/gauge

Condition

Professional Manufacturer CZPT brand air driven hydraulic Automatic pressure test bench

Product Description

Hydraulic high pressure test machine -pneumatic liquid booster pump control type with armored glass protection cabinet.
Applicable for :hose/tube/pipe/valve/sensor/cylinder/gauge
Test medium: water/hydraulic oil
Test pressure range:0-6400 bar
Drive source: clean compressed air
Driven compressed air pressure: 3-8bar (recommended driving pressure ≤8bar)
Our company has rich experience in the hose ,tube, pipe pressure test field, we can provide reliable performance hydraulic pressure test equipment, leakage test equipment, pressure pulse test equipment, It is mainly used for testing the pressure performance of automobile brake pipe, power train pipe and other pressure parts.

By using the compressed air as the power source, the output liquid pressure and the pressure of the driving air source is in proportionality. By adjusting the pressure of the driven air, the corresponding liquid pressure can be obtained. When the output pressure reaches the preset value, The pneumatic booster pump will stop automatically, the output pressure is stable in the pre adjustment of the pressure. It has the characteristics of explosion proof, adjustable output pressure, small volume, light weight, simple operation, reliable performance, wide application range, etc.. It is especially suitable for high-pressure and ultrahigh pressure blasting and pressure testing of valves, pipes, joints pressure.

High pressure test bench is composed of Air driven liquid booster pump and control valve, pressure gauges, gas inlet filter, air regulating valve, pipelines, cabinet(toughened glass, professional protective screen, to ensure maximum safety), high pressure regulator, high pressure relief valve, pressure release valve etc.

  Product Parameters.

Type

Pressure ratio

Max outlet pressure  (bar)

Max flow   (L/min)

Connection size(inch)Drive

Connection size(inch)   Inlet

Connection size(inch)   Outlet

THT-LDD-16

16:1

128

19.73

G1/2

NPT 1/2

NPT 1/2

THT-LDD-28

28:1

224

11.3

G1/2

NPT 1/2

NPT 1/2

THT-LDD-40

40:1

320

7.69

G1/2

NPT 1/2

NPT 1/2

THT-LDD-64

64:1

512

4.94

G1/2

NPT 1/2

NPT 3/8

THT-LDD-80

80:1

640

3.96

G1/2

NPT 1/2

NPT 3/8

THT-LDD-100

100:1

800

3.13

G1/2

NPT 1/2

NPT 3/8

THT-LDD-175

175:1

1400

1.81

G1/2

NPT 3/8

M14*1.5

THT-LDD-255

255:1

2040

1.23

G1/2

NPT 1/4

M14*1.5

THT-LDD-400

400:1

3200

0.79

G1/2

NPT 1/4

M14*1.5

 

1.CZPT Burst Pressure Test Benches is Special pressure testing equipment,   Provide pressure and bursting testing for various hydraulic hoses, valves, vessels, tubes and other hydraulic products.

2.They are use air driven hydraulic pump for liquid pressurization. Test pressure is up to maximally 320Mpa. Test medium can be water and hydraulic oil.

3.We have introduced the German technology to produce this high-performance test bench. The machine has a pneumatic pump and no electricity needed.

4.The machine is easy for operation with low noise and fast boosting. Testing liquid can be recycled. It played a important role in the improvement of quality and reliability.

Detailed Images

Key features include:
1. Reliable ,Easy to Maintain ,compact and robust.
2. No heat, flame or spark risk
3. Infinitely variable output pressure and flow capability
4. Air driven Models do not require electrical connection ,easy to apply automatic controls.
5. The piping system with non welded connection
6.Seals system designed for long working life, No lubricated required.
7. Wide range of standard and customized liquid pressure test systems
8.In the testing process, the pressure can be automatically compensated; time after the bursting pressure decreased rapidly, pressure automatic stop system;
9.The protection of tooling, special design, can effectively protect the damage of blasting operation personnel and equipment.
10. With comprehensive security protection; observation window with security protection mechanism which cannot operate before turn off.  Meanwhile with emergency stop switches, safety valves and other hardware protection measures.

Company Information

TEREK Company focus on provide various kinds of pneumatic and hydraulic booster pumps, booster systems, High pressure filling equipment, pressure testing system and fluid pressure solutions to the customers all over the world etc. With more than 18 years experiences in fluid pressure exchange and controlling field.

Our main products including:

High Pressure Booster Pumps (Air Driven Gas Booster Pump, Air Driven Liquid Pump,Refrigerant booster pump and Air Amplifier )

High Pressure Systems (Air Driven Gas,Liquid Booster Stations, Filling machine and tube expanding machine )

High Pressure Test Equipment(Hydraulic Pressure Test Machine, Safety relief valve test bench, Cylinder test machine, Burst/Hydrostatic valve and pipe test machine,Impulse Testing Machine etc.)

TEREK will sustain to go beyond ,pursuit perfect and fulfill the expect from worldwide customers. 

Supplying high-quality product and service is the CZPT aim of TEREK.

 

FAQ

 1.Q : Are you manufacturer ?

A: Yes, We are the manufacturer with continuous and improved R&D. Production,

Quality Check and service supply.

2.Q : Can I get your price list ?

A: Yes, Sure. In order to send you our available offered price. Please choose the products and let us know the product model and requirement in detail.

3.Q : Do you have stock for all items?

A:In general, we have some stock, while if you need a bulk order, we still need time to produce it. Of course, we will inform all details you before your payment.

4.Q : What is payment terms ?

A: Sample order : 100% full payment before start to production;

Large order : 30% deposit first, 70% pay after see the BL copy ;

5.Q: Can give free sample ?

A : Free : if small spare parts and the cost not too much is ok ;

Not Free : the cost expensive and all the machine can not be free ;

6.What about the services and product' quality?

Each instruments must be carried out 100% quality examination and test when shipping

and delivery goods.

7.Q : How long can be finished the goods ?

Delivery date:  5-30 working days after deposit paid

Two years warranty, when the products reach to destination.

Any more questions, please contact us, and welcome to add my or for more details chat.

 

Different parts of the drive shaft

The driveshaft is the flexible rod that transmits torque between the transmission and the differential. The term drive shaft may also refer to a cardan shaft, a transmission shaft or a propeller shaft. Parts of the drive shaft are varied and include:
The driveshaft is a flexible rod that transmits torque from the transmission to the differential

When the driveshaft in your car starts to fail, you should seek professional help as soon as possible to fix the problem. A damaged driveshaft can often be heard. This noise sounds like "tak tak" and is usually more pronounced during sharp turns. However, if you can't hear the noise while driving, you can check the condition of the car yourself.
The drive shaft is an important part of the automobile transmission system. It transfers torque from the transmission to the differential, which then transfers it to the wheels. The system is complex, but still critical to the proper functioning of the car. It is the flexible rod that connects all other parts of the drivetrain. The driveshaft is the most important part of the drivetrain, and understanding its function will make it easier for you to properly maintain your car.
Driveshafts are used in different vehicles, including front-wheel drive, four-wheel drive, and front-engine rear-wheel drive. Drive shafts are also used in motorcycles, locomotives and ships. Common front-engine, rear-wheel drive vehicle configurations are shown below. The type of tube used depends on the size, speed and strength of the drive shaft.
The output shaft is also supported by the output link, which has 2 identical supports. The upper part of the drive module supports a large tapered roller bearing, while the opposite flange end is supported by a parallel roller bearing. This ensures that the torque transfer between the differentials is efficient. If you want to learn more about car differentials, read this article.
air-compressor

It is also known as cardan shaft, propeller shaft or drive shaft

A propshaft or propshaft is a mechanical component that transmits rotation or torque from an engine or transmission to the front or rear wheels of a vehicle. Because the axes are not directly connected to each other, it must allow relative motion. Because of its role in propelling the vehicle, it is important to understand the components of the driveshaft. Here are some common types.
Isokinetic Joint: This type of joint guarantees that the output speed is the same as the input speed. To achieve this, it must be mounted back-to-back on a plane that bisects the drive angle. Then mount the 2 gimbal joints back-to-back and adjust their relative positions so that the velocity changes at 1 joint are offset by the other joint.
Driveshaft: The driveshaft is the transverse shaft that transmits power to the front wheels. Driveshaft: The driveshaft connects the rear differential to the transmission. The shaft is part of a drive shaft assembly that includes a drive shaft, a slip joint, and a universal joint. This shaft provides rotational torque to the drive shaft.
Dual Cardan Joints: This type of driveshaft uses 2 cardan joints mounted back-to-back. The center yoke replaces the intermediate shaft. For the duplex universal joint to work properly, the angle between the input shaft and the output shaft must be equal. Once aligned, the 2 axes will operate as CV joints. An improved version of the dual gimbal is the Thompson coupling, which offers slightly more efficiency at the cost of added complexity.
air-compressor

It transmits torque at different angles between driveline components

A vehicle's driveline consists of various components that transmit power from the engine to the wheels. This includes axles, propshafts, CV joints and differentials. Together, these components transmit torque at different angles between driveline components. A car's powertrain can only function properly if all its components work in harmony. Without these components, power from the engine would stop at the transmission, which is not the case with a car.
The CV driveshaft design provides smoother operation at higher operating angles and extends differential and transfer case life. The assembly's central pivot point intersects the joint angle and transmits smooth rotational power and surface speed through the drivetrain. In some cases, the C.V. "U" connector. Drive shafts are not the best choice because the joint angles of the "U" joints are often substantially unequal and can cause torsional vibration.
Driveshafts also have different names, including driveshafts. A car's driveshaft transfers torque from the transmission to the differential, which is then distributed to other driveline components. A power take-off (PTO) shaft is similar to a prop shaft. They transmit mechanical power to connected components. They are critical to the performance of any car. If any of these components are damaged, the entire drivetrain will not function properly.
A car's powertrain can be complex and difficult to maintain. Adding vibration to the drivetrain can cause premature wear and shorten overall life. This driveshaft tip focuses on driveshaft assembly, operation, and maintenance, and how to troubleshoot any problems that may arise. Adding proper solutions to pain points can extend the life of the driveshaft. If you're in the market for a new or used car, be sure to read this article.

it consists of several parts

"It consists of several parts" is 1 of 7 small prints. This word consists of 10 letters and is 1 of the hardest words to say. However, it can be explained simply by comparing it to a cow's kidney. The cocoa bean has several parts, and the inside of the cocoa bean before bursting has distinct lines. This article will discuss the different parts of the cocoa bean and provide a fun way to learn more about the word.
air-compressor

Replacement is expensive

Replacing a car's driveshaft can be an expensive affair, and it's not the only part that needs servicing. A damaged drive shaft can also cause other problems. This is why getting estimates from different repair shops is essential. Often, a simple repair is cheaper than replacing the entire unit. Listed below are some tips for saving money when replacing a driveshaft. Listed below are some of the costs associated with repairs:
First, learn how to determine if your vehicle needs a driveshaft replacement. Damaged driveshaft components can cause intermittent or lack of power. Additionally, improperly installed or assembled driveshaft components can cause problems with the daily operation of the car. Whenever you suspect that your car needs a driveshaft repair, seek professional advice. A professional mechanic will have the knowledge and experience needed to properly solve the problem.
Second, know which parts need servicing. Check the u-joint bushing. They should be free of crumbs and not cracked. Also, check the center support bearing. If this part is damaged, the entire drive shaft needs to be replaced. Finally, know which parts to replace. The maintenance cost of the drive shaft is significantly lower than the maintenance cost. Finally, determine if the repaired driveshaft is suitable for your vehicle.
If you suspect your driveshaft needs service, make an appointment with a repair shop as soon as possible. If you are experiencing vibration and rough riding, driveshaft repairs may be the best way to prevent costly repairs in the future. Also, if your car is experiencing unusual noise and vibration, a driveshaft repair may be a quick and easy solution. If you don't know how to diagnose a problem with your car, you can take it to a mechanic for an appointment and a quote.

China high quality CZPT High Pressure Test Hose/Tube/Pipe/Valve/Sensor/Cylinder Hydraulic Pressure Test     near me shop China high quality CZPT High Pressure Test Hose/Tube/Pipe/Valve/Sensor/Cylinder Hydraulic Pressure Test     near me shop